Sugar Color Sensor Module

The Sugar Color Sensor is a digital color sensor IC with an IC bus interface. This IC senses red, green, and blue light (RGB) and converts it into digital values. High sensitivity, a wide dynamic range, and excellent Ircu characteristics make this IC most suitable for obtaining the illuminance and color temperature of ambient light. It can detect a very wide range of light intensities.

Parameters

Size	24 x 24 x 56 mm
Weight	5.1 g
Signal	i2c
Detection Distance	Approximately 4mm

Guide for Use in Kittenblock

Note: Before selecting the hardware, ensure that the hardware mainboard is updated to the latest version (i.e., there is no small arrow for upgrade in the lower right corner).

Program Package

链接：https://pan.baidu.com/s/1gWidPYNJTISkZZA1CTOjeQ?pwd=KBKB
提取码：KBKB

Future Board

Select the hardware Future Board and add the hardware sub-plugin Color Sensor.

Brick Introduction

	Update sensor values to ensure the consistency of the RGB data, ensuring they are obtained in the same sampling, so use this block to update.
	Select to return RGB color values through the drop-down box
	Luminance value

Circuit Connection

Robotbit edu expansion board

Robotbit pin version

Case

danger

When detecting color, the sensor's distance from the target is best at about 4mm.

Upload Program

Please ensure that you have written the program according to the instructions above, then click the code switch button in the upper left corner of the software, and click the upload button in the pop-up code box.

info

If you are not clear about the concepts of program upload and online running, first check the "Quick Start Guide for Future Board Programming."